Nagykereskedelem – csak viszonteladók / integrátorok részére
Hírlevél
Híreink
Mit tegyünk a Mikrotik eszközünkkel, mielőtt elkezdenénk az RMA folyamatot?
2024-03-27 10:35
Biztonságtechnika & UPS
2024-03-04 10:19
Szállítmányozónk
Mikrotik Dual chain 24.5dBi 5GHz CPE/Point-to-Point Integrated Antenna, 600Mhz CPU, 64MB RAM
Nyitólap
> Mikrotik
> Dual chain 24.5dBi 5GHz CPE/Point-to-Point Integrated Antenna, 600Mhz CPU, 64MB RAM
Márka: Mikrotik
Cikkszám: LHG 5 (RBLHG-5nD)
Kiszerelés: db
Cikkszám: LHG 5 (RBLHG-5nD)
Kiszerelés: db
Termékismertető
LHG 5
The LHG is a compact and light 5GHz 802.11 a/n wireless device with an integrated dual polarization 24.5 dBi grid antenna at a revolutionary price. It is perfect for point to point links or for use as a CPE at longer distances and supports Nv2 TDMA protocol.
The grid design ensures protection against wind, and the fact that the antenna element is built into the wireless unit means no loss on cables.
We have two versions available.
- RBLHG-5nD-US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.
- RBLHG-5nD (International) supports 5150MHz-5875MHz range.
Product specifications
| Details | |
|---|---|
| Product code | RBLHG-5nD |
| CPU nominal frequency | 600 MHz |
| CPU core count | 1 |
| Size of RAM | 64 MB |
| 10/100 Ethernet ports | 1 |
| Wireless standards | 802.11a/n |
| Wireless chip model | AR9344 |
| PoE in | Yes |
| Supported input voltage | 11 V - 30 V |
| Dimensions | ? 391 x 222 mm; package 450 x 450 x 145 mm |
| Operating System | RouterOS |
| Tested ambient temperature | -40 to 70° C |
| License level | 3 |
| Antenna gain DBI | 24.5 |
| CPU | AR9344 |
| Max Power consumption | 6W |
| Number of chains | 2 |
| Storage type | FLASH |
| Storage size | 16 MB |
| Suggested price | $59 |
Wireless specifications
| 5 GHz | ||
|---|---|---|
| TX | RX | |
| 6MBit/s | 25 | -96 |
| 54MBit/s | 20 | -80 |
| MCS0 | 25 | -96 |
| MCS7 | 19 | -75 |
wireless parameters may be limited in software, depending on your local regulatory limitations
Performance test results
| RBLHG-5nD | AR9344 100M 1 port test | ||||||
| Mode | Configuration | 1518 byte | 512 byte | 64 byte | |||
| kpps | Mbps | kpps | Mbps | kpps | Mbps | ||
| Bridging | none (fast path) | 8.1 | 98.4 | 23.5 | 96.3 | 148.0 | 75.8 |
| Bridging | 25 bridge filter rules | 8.1 | 98.4 | 23.5 | 96.3 | 87.6 | 44.9 |
| Routing | none (fast path) | 8.1 | 98.4 | 23.5 | 96.3 | 148.0 | 75.8 |
| Routing | 25 simple queues | 8.1 | 98.4 | 23.5 | 96.3 | 106.6 | 54.6 |
| Routing | 25 ip filter rules | 8.1 | 98.4 | 23.5 | 96.3 | 60.5 | 31.0 |
- All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
- Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
- Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
- Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results
Letölthető fájlok, adatlapok
| LHG-160511085639.pdf |
Hozzászólások